Tree Felling is an extremely dangerous task that should only be undertaken by trained professionals. Failure to follow proper procedures can result in damage to surrounding property and serious injury or death to the person performing the felling. This article will cover the basics of Tree Felling and provide some tips to help make your next project safer.
Before making the first cut, you should assess the situation carefully. Look at the direction the tree is leaning and determine whether it is likely to hit anything important, such as a home, power lines, cars or other trees. Also consider wind strength, direction and velocity. If it is too windy or rainy to safely perform the takedown, wait for milder conditions.
If you decide to fell the tree, start with a notch cut. The notch cut is the first and most critical step of the felling process and will determine in which direction the tree falls. The notch should be about 1/3 the way through the side of the tree that is to fall, and it should have an adequate hinge width to control the speed and direction of the fall.
After the notch is made, remove any branches that could be dislodged during the fall. Be sure to clear two escape routes on the side that is not falling, as this will reduce the risk of tripping or other accidents during the felling process. It is a good idea to walk these escape routes before beginning the actual felling so that they are familiar and clear of tripping hazards.
source https://litchfieldtreeservices.wordpress.com/2024/03/02/the-basics-of-tree-felling/
No comments:
Post a Comment